Click On question below for answers

FAQ SUPPORT

What is the processing time for tune files? How do I submit? Why haven't I received my tune file yet?

Tune File Processing Time: Up to 3 business days during regular business hours if you already own a tuning device.

**PLEASE NOTE: ANY ORDERS WITH FUEL UPGRADES, LARGE TURBOS  OR CUSTOM REQUESTS MAY BE  SUBJECT TO EXTENDED LEAD TIMES**

If you purchased a NEW TUNING PACKAGE, this ETA starts AFTER you have notified us of receiving your device and followed the instructions PER tuning platform.

EZ LYNK: Our processing timeframe is up to 3 business days after you have successfully linked your truck on EZ Lynk and notified us that the link has been completed. Use the Contact Us tab on our website to let us know you have linked your EZ Lynk to your truck.

Tech Account: Ezlynk@caperformance.ca

WATCH VIDEO: How to "EZlynk" Manual Link Video

EFI LIVE — NEW DEVICES: Our processing timeframe is up to 3 business days after you have provided your AutoCal serial number. Use the Contact Us tab on our website to submit your serial number.

EFI LIVE — USED DEVICES: Our processing timeframe is up to 3 business days after your order has been placed and all required information has been received.

MM3 — NEW DEVICES: Our processing timeframe is up to 3 business days after you have notified us that you have received your device. Use the Contact Us tab on our website to let us know you have received your device.

MM3 — USED DEVICES: Our processing timeframe is up to 3 business days after your order has been placed and all required information has been received.

Reminder to ALL Customers: We are closed on weekends. We highly recommend flashing your vehicle during our regular business hours in case support is required.

Fuel Economy - MPG

We do not guarantee fuel economy gains with our tuning. Many factors can affect fuel mileage, including driving habits, tire size, gearing, terrain, weather, fuel quality, vehicle condition, and how the truck is used.

Although most of our customers report improved fuel economy when running our tuning, actual results will vary from truck to truck and depend heavily on how the vehicle is driven and used.

It's also worth noting that some tuners manipulate the fuel economy calculation, making the number displayed on the dash appear better than the truck is actually achieving.

Locked Shifts vs. Partial Lock (OEM) Shifts

Locked Shifts

  • The torque converter is fully locked during the programmed shifts.
  • Provides a more direct connection between the engine and transmission.
  • Reduces converter slip during shifts.
  • Can help reduce transmission heat caused by converter slip.
  • Provides a smooth, controlled shift with less potential for shift flare.
  • We recommend locked shifts for most customers.

Partial Lock (OEM) Shifts

  • Uses the factory shift strategy, where the torque converter remains partially unlocked/slipping during the shift.
  • Provides a softer, more factory-like feel.
  • Can allow more converter slip during shifts, which can contribute to additional heat.
  • Can sometimes introduce shift flare, especially as the transmission wears.
  • Most customers who experience shift flare with the OEM partial-lock strategy end up switching to our locked-shift tuning.

Which is better?

For a properly functioning stock transmission, we generally recommend locked shifts. They provide a more controlled shift, reduce unnecessary converter slip, and can help keep transmission temperatures lower.

That doesn't mean partial lock is harmful or that locked shifts will automatically make the transmission last longer. Both strategies can work well on a stock transmission, and the choice ultimately comes down to how you prefer the truck to drive.

These descriptions are based on a stock transmission. A built transmission may have a noticeably firmer or harsher feel depending on how it was built and what components were used.

2nd vs. 3rd Gear Lockup

We offer both 2nd-gear and 3rd-gear lockup with our locked-shift tuning. Our locked shifts are not harsh or excessively firm—they are designed to provide a smooth, controlled shift while eliminating the flare that can occur with the OEM partial-lock strategy.

2nd-Gear Lockup

  • Locks the converter sooner.
  • Puts power to the ground earlier.
  • Reduces converter slip sooner.
  • Our 2nd-gear lockup is smooth, not an aggressive or harsh engagement.
  • This is our preferred setup, especially for customers who tow or work their trucks.

3rd-Gear Lockup

  • Keeps the converter unlocked through 2nd gear and locks it in 3rd.
  • Provides a slightly more relaxed/factory-like feel.
  • Still uses our smooth locked-shift strategy.

For reliability and transmission longevity, both options are equally suitable. Neither 2nd- nor 3rd-gear lockup has an inherent advantage for transmission life when the transmission is operating properly. The choice is primarily personal preference and how you want the truck to feel.

Our personal preference is 2nd-gear lockup with locked shifts because it gets the converter locked sooner and puts the power to the ground earlier. The sooner the converter locks, the less time it spends slipping, which can reduce the potential for additional heat from converter slip.

 

The descriptions above are based on a stock transmission. A built transmission may have a firmer or harsher feel depending on how it was built and what components or modifications were used. Our locked-shift tuning itself is designed to be smooth, but the overall feel will also depend on the transmission.

Understanding the 68RFE 3–4 Gear Ratio Gap

One of the important characteristics of the 68RFE transmission is the relatively large gear ratio change between 3rd and 4th gear.

 

The 68RFE has a 1.41:1 ratio in 3rd gear and a 1.00:1 ratio in 4th gear. This means the engine RPM drops by roughly 29% when the transmission shifts from 3rd to 4th.

 

For example, if the engine is turning 2,500 RPM in 3rd gear, the RPM can drop to approximately 1,775 RPM after the 3–4 shift with the torque converter locked.

 

Why Does This Matter?

 

The 3–4 shift has a much larger RPM drop than most of the other upshifts:

 

ShiftGear Ratio ChangeApprox. RPM Drop2–31.83 → 1.41~23%3–41.41 → 1.00~29%4–51.00 → 0.82~18%5–60.82 → 0.63~23%

 

Because of this large ratio gap, the 3–4 shift can feel noticeably different from the other shifts. The engine RPM drops significantly more than it does during most other upshifts.

 

This becomes especially noticeable when the truck is towing, climbing a hill, accelerating, or operating under increased engine load.

 

Factory Transmission Calibration

 

The factory strategy can mask the effect of the large ratio gap by allowing the engine to lug in the higher gear.”, the transmission generally shifts into the higher gears sooner.

 

When the transmission shifts from 3rd into 4th, the engine experiences the same approximately 29% RPM drop caused by the gear ratio change. The difference is what happens afterward.

The factory strategy allows the engine to continue operating at the lower RPM in 4th gear. Under load, this can cause the engine to lug, requiring more throttle and making the truck feel lazy or less responsive.

 

Because the engine is simply pulled down and continues operating in 4th, the large 3–4 ratio change may not feel like a particularly dramatic event to the driver.

 

CA Performance Transmission Calibration

 

Our transmission tuning is designed around keeping the Cummins in the proper RPM range for the conditions, rather than simply getting the transmission into the highest possible gear as quickly as possible.

 

Because of the large 3–4 ratio gap, we may intentionally allow the transmission to hold 3rd gear longer and make the 3–4 shift at a higher RPM.

 

This keeps the engine operating in a more effective RPM range before the shift and helps prevent it from being pulled too far down into an RPM range where it has to work harder to maintain vehicle speed.

 

What Does This Feel Like to the Driver?

 

With our transmission tuning, the 3–4 shift may feel different from the other gear changes because of the large RPM drop between the two gears.

 

You may notice the truck pulling strongly in 3rd gear, followed by a noticeable drop in RPM when 4th gear engages. The acceleration can soften briefly as the engine transitions into the taller 4th gear before continuing to accelerate.

This can sometimes feel like the truck “falls on its face” for a moment, particularly when towing, climbing a grade, accelerating, or operating under increased load.

 

This is a characteristic of the 68RFE's 3–4 gear ratio gap, not necessarily an indication that the transmission is shifting incorrectly.

The important distinction is that our calibration is designed to keep the engine in the appropriate RPM range leading up to the shift, rather than allowing the truck to enter 4th gear too early and lug the engine.

 

What Happens When the Engine Is Lugging?

 

When the engine is pulled down too far in RPM, it has to produce more torque to maintain the same vehicle speed. Under load, this can result in:

  • Reduced throttle response
  • Slower acceleration
  • Increased engine load
  • Increased turbocharger effort
  • Increased fuel consumption
  • More frequent downshifts as the transmission tries to recover

This is why getting into a higher gear sooner isn't necessarily better. The transmission may be in a higher gear, but the engine may be operating outside of the RPM range where it can efficiently produce the torque required for the conditions.

 

Our Transmission Tuning Philosophy

 

Our CA Spec transmission tuning is designed to provide the best combination of drivability, power delivery, efficiency, and transmission reliability.

 

With added power, larger tires, towing, or increased vehicle weight, the engine can require significantly more torque to maintain vehicle speed. Our shift strategy is designed to keep the engine in the proper RPM range for those conditions and prevent unnecessary lugging.

A higher shift point isn't necessarily a bad thing. In many situations, it's intentional and helps keep the engine where it needs to be rather than forcing it into an overdrive gear too early.

 

The 3–4 shift is intentionally treated differently because of the large ratio gap. Keeping the engine in 3rd a little longer allows the shift to occur from a more appropriate RPM and helps provide better power delivery after the shift.

Is a Transmission Relearn Required?

Yes. We recommend performing the appropriate transmission relearn procedure after installing our calibration. A transmission relearn is required even if you purchased engine-only tuning

How to Perform a Transmission Relearn with EZ Lynk?

Important: Perform a 68RFE Quick Relearn using EZ LYNK after every ECM flash.

 

To perform the relearn, open the EZ LYNK AutoAgent app, go to the Functions tab, and select 68RFE Quick Relearn. The engine must be running, and the transmission must be at operating temperature before performing the relearn.

 

If You Are Having Trouble Performing the Relearn

If the 68RFE Quick Relearn will not initiate or you are having trouble connecting to the truck, try the following procedure after successfully uploading the tune:

  1. Turn the ignition key to OFF.
  2. Completely close/kill the EZ LYNK AutoAgent app.
  3. Disconnect and remove the programmer from the truck.
  4. Turn the ignition key to RUN.
  5. Reconnect the programmer to the truck.
  6. Open EZ LYNK AutoAgent and reconnect to the programmer through Wi-Fi.
  7. Once connected, navigate to the Functions tab and initiate the 68RFE Quick Relearn again.

After completing the relearn, drive the truck 50–100 miles under normal city-driving conditions. Allow the transmission to shift through 1st–6th gears while keeping throttle input below 40%. This allows the transmission's adaptive learning to properly recalibrate to the new engine calibration.

Keep in mind that it may take up to 250 miles of normal driving for the transmission to fully complete its adaptive learning and achieve the best possible shift quality.

Failure to perform the transmission relearn and adaptation drive cycle may result in poor shift quality, increased clutch wear, and may contribute to premature transmission failure.

 

Can I perform a Transmission Relearn without a Special Tool?

If a scan tool isn't available to perform a Quick Relearn, the transmission can still relearn its adaptive values through normal driving, although it will take longer.

Transmission Relearn Without a Scan Tool

  1. Allow the transmission to reach normal operating temperature.
  2. Drive the vehicle under light throttle (less than 40% throttle).
  3. Allow the transmission to upshift and downshift through all gears multiple times during normal city driving.
  4. Avoid heavy acceleration, towing, wide-open throttle, or aggressive driving during the relearn period.
  5. Continue driving normally for approximately 100–250 miles to allow the transmission to relearn clutch volumes and shift adaptives.

Note: Shift quality may be firmer, softer, or inconsistent during the relearn process. This is normal and should improve as the transmission completes its adaptive learning cycle. Performing a Quick Relearn with a compatible scan tool is still the preferred method, as it significantly speeds up the relearn process and typically results in better initial shift quality.

What to do once I receive my EFI Live AutoCal?

EFI LIVE(new devices): WE HAVE A 24-48 BUSINESS HOUR PROCESSING WAIT AFTER YOU HAVE GIVEN US YOUR AUTOCAL SERIAL.

USE the Contact us Tab on our website to submit your serial number. To initiate the tune writing process, we require the serial number. The serial number located on the back of the autocal itself.

Used devices will have the same processing time but after your order is placed.

What to do once I receive my EZ Lynk Auto Agent?

EZLYNK: WE HAVE A 24-48 BUSINESS HOUR PROCESSING WAIT AFTER YOU HAVE LINKED YOU TRUCK ON EZLYNK, AFTER YOU NOTIFIED US OF LINKING.

USE the Contact us Tab on our website to let us know you have linked your Ezlynk to your truck.

Tech Account: Ezlynk@caperformance.ca

WATCH VIDEO: How to "EZlynk" Manual Link Video

Do you offer Free Lifetime Revision?

We do not provide free lifetime revisions. We will
consistently assist and support our customers, but creating custom tune files
requires time, and we have many clients. If we personally crafted all our
clients files and provided complimentary revisions, we would be incredibly
occupied making changes for no compensation, simply so customers could
"experiment" with something. We wouldn’t have time for new or
potential customers.

 

We don’t simply toss random tune files to our customers, as
that would be easy and fast; therefore, we regretfully don’t provide lifetime
changes at no charge.

 

I trust you can appreciate that value and quality come at a
price. We appreciate our customers, and I trust they appreciate us equally.

 

If revisions are needed, here is a link to our product
listing for revisions

 

https://www.caperformance.ca/products/tune-file-revision

Does Ezlynk "Lifetime Support" entitle me to lifetime revisions at no charge?

Lifetime is only lifetime EZLYNK LINK/Cloud access. It has nothing to do with tuning companies. A lot of people are misinformed on this. This is due to other tuning companies misinforming the public with "Lifetime SUPPORT PACKS". The cost for this goes directly to EZLYNK to VIN license your truck and your membership to hold your tuning in the cloud service. It also allows you to remain connected to your tuning company to have the ability to send and receive tuning, Datalogs. Essentially you buy the cloud service and link for the "lifetime of the vehicle".

What platform should I choose?

EFI Live: Requires a windows PC
to transfer your file, best data logging capability. Our best seller.

EZ Lynk: Is cloud based and
required a phone or tablet to do the tuning. It’s also capable of doing trans
quick relearn and change your speedometer for larger tires. EZ Lynk requires cloud access which comes at a cost with two options (4-week access or Lifetime access)

MM3: Is a monitor as well as
your tuning device. You can switch your tune power level without a physical
switch added. Can also change speedometer for larger tires

Do I need trans tuning for my stock 68RFE transmission?

We recommend every truck to have trans tuning. The 68RFE has horrible shift points from the factory causing Lugging issues in 5th and 6th gear. Our trans tuning solves these issues for lugging while also adding extra pressure on the clutch packs. The stock VB can handle 180PSI to enhance clamping capacity on the clutch packs. This aids for longevity and reliability paired with engine tuning

68RFE - Part Lock Shifts (OEM) vs Locked Shifts

We have the capability to keep OEM Part lock TC behaviors or upgrade them to Locked Shifts to remove the TC "flare" feel during the shifts.

Locked Shifts in Detail, What is Locked Shifts?The 68RFE has been a very delicate transmission in Chryslers eyes. In order to keep it jello, Chrysler decided to "partially lock" the Torque Converter DURING the shifting event. This takes strain off the clutches inside your transmission and really cushions the shifts for the hard parts. In doing so, some may notice a rise in RPM during the shift. - Almost like a slip/flare feel. This is the TCM going into a partial lock up state to jello the shift, it also comes really apparent on worn transmissions with slow to bleed off pumps. 2013-18 trucks are really bad at feeling this effect. In order to solve this annoying rise in rpm, we use Locked Shifts. The earlier 07-12 trucks were "tighter" for the Partial lockup, meaning locked shifts are not really required as they feel OK. 2019+ trucks, Chrysler made the partial lock up tighter like the 07-12 trucks again.


We recommend our latest transmission tuning, Locked Shifts, which has been refined to deliver smooth and precise performance. Please note that minor adjustments may be necessary if your transmission operates with tighter tolerances than typical.

I want to remove my grid heater, Is your tuning capable of this?

All our tuning comes with this ready to do. Simply
unplug the Heater grid relay (Small ECM control wires on the relay) to inhibit the
p2609 code from coming on.

Do you offer AISIN trans tuning?

NO, we DO NOT offer AISIN trans tuning. We only offer our in-house 68RFE trans tuning at the moment